M2120A/MD2120A內圓磨床

主要特點Main Characteritics
※機床的進給及修正，由二個互不干涉的傳動機構執行，進給系統具有定程磨削功能，采用手動或液動二種進給方式。
※機床設有快跳機構.因此退出砂輪進行測量或修正后不必重新手動對刀。
※工作臺起動有液壓開關閥，確保裝卸工件時安全性。
※機床在特殊訂貨時，可配高速砂輪軸為18000轉1分，以適宜20~-50mm孔的磨削。
※機床在床頭箱頂部設有端磨裝置.并且端磨回轉與工作臺縱向運動有可靠的液壓聯鎖。
※Feed and dressing movementsare controlled by means of two independent driving systems. Size-metric grinding is adopted.
※Feed movement can be carried out both manually and hydralically.
※Because the machine is quipped with jumping mechanism, it is unnecessary to reset the tool after returning grinding whelformeasurement or dressing.
※The machine is equipped with a hydraulic switch valve to ensure safety during loading and unloading workpieces.
※A grinding spindle with 18,000 r/min. is optional for grinding bore diameter ranging from 20 to 50mm.
※An endface grinding device is provided on the top of the workhead. There is a hydraulic interlock system between the swivel ofthe endface grinding device and the longitudinal movement of the worktable.

M2120A/MD2120A內圓磨床